Frequently asked questions
IntroductionWheel, Balancing, Tire and Wheel Radial and Lateral Run-Out, Checking
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...
Run-Flat Tire, Seal Inside-Technology
The vehicle can be equipped with run-flat tires as an
option.
The Seal Inside technology is a system that allows the
vehicle to continue driving even if the tire has been punctured
by a nail or screw: a protective coating on the in ...
Siemens Wheel Electronics Tire Pressure Monitoring Sensor, Removing and
Installing
WARNING
If tire sealant was used, then the wheel electronics
on that particular wheel must be replaced.
The Siemens wheel electronics does not have a
microencapsulated ...