Volkswagen Polo Owners Manual: Hill Hold Assist
First read and observe the introductory information
and safety warnings
The Hill Hold Assist function actively holds the vehicle when pulling away on an incline.
The Hill Hold Assist function is automatically activated if the following conditions are met
| Conditions 1 to 3 must be met at the same time: | ||
|---|---|---|
| Manual gearbox | Automatic gearbox | |
| 1. | On an incline, the stationary vehicle must be held in position with the footbrake until the vehicle starts moving. | |
| 2. | The engine is running smoothly. | |
| 3. | Fully depress the clutch pedal and move the gear stick to the first gear position if you want to drive forwards up a hill or to the R position if you want to reverse up a hill. | The driving mode R, D or S has been selected. |
| In order to start moving, remove your foot from the brake pedal, then release the clutch pedal (clutch engages) and press the accelerator simultaneously. The brake will gradually be released as the clutch is engaged. | To start moving, remove your foot from the brake pedal and press the accelerator immediately. The brake will gradually be released as the vehicle pulls away. | |
The Hill Hold Assist function will be deactivated immediately:
- As soon as one of the conditions indicated on is not fulfilled.
- If the engine is not running smoothly or there is an engine fault.
- If the engine is switched off or has stalled.
- Vehicles with automatic gearbox: if the selector lever in is the neutral position N.
Start/stop system
Fig. 119 In the upper part of the centre
console: button for the start/stop system
First read and observe the introductory information
and safety warnings If the start/stop system is activated ...
ParkPilot
...
Other materials:
Positive and earth jump lead connection points
Fig. 190 In the engine
compartment: jump lead connection point, positive ⊕
First read and observe the introductory
information and safety warnings
The positive jump lead connection point is in the engine compartment. In
order to establish a suitable earth connection, screw towing eye into ...
Single Wire Seal Assembly Tools
Assembly tools serve the purpose of allowing the single wire
seals to be slid without damage into terminal housing up to
stop, this achieves a complete seal between single wire and
terminal housing.
Four assembly tools for single wire se ...
Using the vehicle in other countries and continents
First read and observe the introductory information
and safety warningsThe vehicle has been manufactured specifically for a particular
country and complies with the registration regulations that applied in that country
at the time of vehicle production.
If the vehicle is to be sold in anothe ...
