Volkswagen Polo Service & Repair Manual: Handling Pressure Vessels
| Secure vessels to prevent them falling over! |
| Secure upright cylinders to stop them falling over and
cylinders lying flat to stop them rolling away. |
| If dropped, the vessels could be so severely deformed that
they rupture. The refrigerant evaporates immediately, liberating
considerable force. Flying fragments of cylinders can cause
severe injuries. |
| Valves may break off if cylinders are not properly
transported. To protect the valves, cylinders are only to be
transported with protective cap screwed on. |
| Never store in the vicinity of radiators. |
| High temperatures may occur next to radiators. High
temperatures are also accompanied by high pressures and the
maximum permissible vessel pressure may be exceeded. |
|
|
|
Not Warming Above 50 °C (122 °F)
To avoid possible risk, pressure vessel regulations specify that vessels are
not to be heated to in excess of 50 °C (122 °F).
Heating Warning
| Do not heat with a naked flame under any circumstances.
Localized overheating can cause structural changes in the vessel
material, which then reduce its ability to withstand pressure.
There is also a danger of refrigerant decomposition due to
localized overheating. |
|
|
Empty Containers
| Empty refrigerant vessels must always be sealed to prevent
the ingress of moisture. Moisture causes steel vessels to
corrode. This weakens the vessel walls. In addition, rust
particles entering into refrigeration systems from vessels will
cause malfunctioning. |
|
|
|
Before performing welding or soldering work on vehicles near
the air conditioning system components, extract the refrigerant
and remove the residue by flushing with c ...
Make sure the shut-off valves are closed before connecting
the charging system to the air conditioning system.
Make sure the process is finishe ...
Other materials:
Infrared Dryer -VAS6876
Definition:
Infrared Dryer -VAS6876-
Product Description:
The infrared dryer is used to dry paste, filler, base paint,
top coats and clear coats on vertical and horizontal surfaces.
...
Two-Part Spray Filling Paste
Definition:
Two-Part Spray Filling Paste -ALN 788 007-
Edition 06/2011
Product Description
The Two-Part Spray Filling Paste -ALN 788 007- is a two-part
spray filling paste us ...
Battery with Visual Indicator, Enhanced
This is a maintenance-free battery with liquid electrolyte
(wet battery).
Caution
Do not remove any of the labels on the battery and
do not add distilled water. Only perform a visual
...
© 2016-2024 Copyright www.vwpolo.net
Welding and Soldering on Refrigeration Systems
Extraction and Charging System Safety Regulations