Volkswagen Polo Service & Repair Manual: General Paint Information
- Safety Precautions
- General Information
- Factory Paint Paint Structure
- Customer Service Paint Paint Structure
- Repair Instructions for the Underbody and Stone Chip Protection
- Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
- Fender Corrosion Repair Measures, in Wheel Housing Liner Contact Area
- Fold Corrosion Servicing Notes
- Corrosion Protection for Body, Attached and Welded Parts
- Parking Aid Sensor, Painting
- ACC - Adaptive Cruise Control
- Original Products
- General Application Instructions for Repair and Painting Systems
- Filling Paste
- Primer Metal
- Plastic Primer
- Filler
- Top Coats
- Clear Coats
- Hardener
- Thinners
- Preservation
- Underbody Protection
- Stone Chip Protection
- Wax Underbody Protection
- Sealing Materials
- Cleaning Agent
- SprayMax System
- Additional Materials
- Workshop Equipment
- Special Tools
Safety Precautions
Safety Precautions when Painting Vehicles with Electric Drive
Caution
Risk of damaging the battery cells at too high of
d ...
Other materials:
How to start the engine using jump leads
Fig. 191 How to connect the jump
leads when starting vehicles without start/stop system: discharged battery Ⓐ and
battery providing assistance Ⓑ
Fig. 192 How to connect the jump
leads when starting vehicles with start/stop system: discharged battery Ⓐ and
battery providing assistance ...
CAN Bus Wires, Repairing
Unshielded two-strand wiring -1-
and -2- with a cross section of
0.35 mm2 or 0.5 mm2
can be used as CAN bus wiring.
The color coding of CAN bus wires can be found in the
following table:
...
Information on the brakes
First read and observe the introductory information
and safety warnings New brake pads cannot generate
the full braking effect during the first 200 to 300 km and must first be run in
. However, you can compensate for the slightly reduced braking force
by applying more pressure to the bra ...
