Volkswagen Polo Service & Repair Manual: Flat Spots, Correcting
Flat spots cannot be removed from tires with workshop
equipment. |
Such flat spots can be "driven out" only by driving the car
until the tires are warm. |
We do not recommend the following method during cold or
winter weather. |
– |
Check the tire pressure and correct, if necessary. |
– |
If possible, drive the vehicle on an expressway. |
– |
If the traffic and road conditions permit, drive at a speed
of 120 km/h to 150 km/h (74.56 to 93.2 mph) for a distance of 20
to 30 km. |
WARNING
Do not endanger yourself or other persons during
this road test. |
Follow all traffic regulations and speed limits when
performing the road test. |
|
– |
Lift the vehicle immediately after the performing the road
test. |
– |
Remove the wheels from the vehicle. |
– |
Balance the wheels on the stationary balancing machine.
Refer to
→ Chapter „Wheel, Balancing“. |
|
|
|
Expanded functions can be performed using Hunter RFT33VAG
Road Force Touch™ Wheel Balancer -VAS6230B4- in addition to the
previously known balancers.
...
Other materials:
Engine oil specification
First read and observe the introductory information
and safety warningsThe engine oil used must correspond exactly to specifications.
The correct engine oil is important for the function and service life of the
engine. A special high quality multigrade oil has been filled at the factory and
t ...
High Pressure Sensor -G65
Note
For switching pressures, removing and installing switches
and switch arrangement and version, see vehicle-specific
refrigerant circuit.
Refer to
→ Rep. Gr.87.
...
Description of the central locking system
First read and observe the introductory information
and safety warnings
The central locking system enables you to lock and unlock all the doors, the
tailgate and tank flap from one central point:
From outside the vehicle with the vehicle key .
From inside the vehicle with the centra ...
© 2016-2024 Copyright www.vwpolo.net