Fig. 193 In bumper at front right: depiction of variants for screwing in towing eye
First read and observe the introductory information and safety warningsThe towing eye is screwed into a threaded hole behind a cover on the right of the front bumper .
The towing eye must always be kept in the vehicle.
Comply with the notes on towing .
Variant A: Removing cover
Variant B: Removing cover
Variant C: Removing cover
Fitting the towing eye
Fitting the cover
NOTICE
The towing eye must always be screwed firmly into the mounting. Otherwise, the towing eye can be ripped out of the mounting when the vehicle is being tow-started or towed.Midtronics Battery Tester -MCR340VKT-, Troubleshooting
Sometimes the display shows the malfunction or the messages
based on the condition.
The following is a list of the most frequent displayed
messages together with suggested solutions.
Note
Refer to the MCR3 ...
Introduction
This chapter contains information on the following subjects:
→ Petrol
→ Diesel
→ Autogas
Different engines require different fuels. The factory-fitted sticker on the
inside of the tank flap indicates the fuel type that is required for your particular
ve ...
Special Connector Systems
Note
If necessary, housing securing mechanisms (secondary locks)
must be released or removed using specified tool before
releasing the contacts. Refer to
→ Chapter „Secondary Lock“.
...