Volkswagen Polo Service & Repair Manual: Fender Corrosion Repair Measures, in Wheel Housing Liner Contact Area
Note
The corrosion protection in the fender seam must be applied on all
replacement parts, on which the attached seal is not already present. |
The additional corrosion protection seal will prevent “chafe marks”
in the fender wheel housing liner. |
– |
Apply filler to the interior and exterior areas of the fender. |
– |
Once the filler has dried, apply and spread the Sealing Material -D
511 500 A2- in the wheel housing liner contact area (fender seam). |
Note
The dimension -b- can vary, because the
fender has different folded edge widths. Note that the entire folded
edge is always sealed. |
Before installing, the inner sides of the wheel housing and
the fillet plate are to be sealed with cavity sealant. |
Refer to
→ Chapter „Preservation“. |
|
|
|
Dry sand the cataphoretic primer on the roof adhesive surface
-item 6-
→ Item down to the bare metal using P180 sandpaper.
...
Corrosion on the Fold Edges, for Instance on the Hood, Door
or also the Rear Lid
–
Remove the corroded areas with
→ Ch ...
Other materials:
Locking or unlocking the driver door manually
Fig. 155 Door handle on driver
door with lock cylinder
First read and observe the introductory
information and safety warnings
If locked manually, all doors are locked. If unlocked manually, only the
driver door is unlocked. Observe information on the anti-theft alarm .
Fold the key bi ...
Infrared Dryer -VAS6878
Definition:
Infrared Dryer -VAS6878-
Product Description:
The infrared dryer is used to dry paste, filler, base paint,
top coats and clear coats on vertical and horizontal surfaces.
...
Tire Wear, Outer Shoulder
Improper Use of Air Suspension Height Adjustment
The use of off road levels is only recommended when driving
off road. The permanent use of off road levels on normal roads
can lead to increased tire wear because the changed height
change ...
© 2016-2024 Copyright www.vwpolo.net