VW Polo manuals

Volkswagen Polo Service & Repair Manual: Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor -G308

Function:
The Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor -G308- determines the temperature behind the evaporator. This value goes to the air conditioning control module and serves as a reference signal for regulating the A/C compressor. This prevents the evaporator from icing up.
 

Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor -G308

A/C Evaporator Temperature Switch -E33
Function: The A/C Evaporator Temperature Switch -E33- determines the temperature between the evaporator cooling fans. It prevents the possibili ...

Refrigerant Circuit Pressures and Temperatures
  WARNING When performing work on refrigerant circuit, observe all generally applicable safety precautions and pressure ...

Other materials:

Warning and indicator lamp
First read and observe the introductory information and safety warnings  Lit up Possible cause Solution Dual clutch gearbox DSG® overheated. Do not drive on! Move the selector lever to position P and leave the gearbox ...

Battery Charger -VAS5903- Maintenance Charging
  Note If the battery is discharged by an electrical consumer during maintenance charging, the Battery Charger -VAS5903- automatically supplies the appropriate charge. Maintenance charging can be performed without time ...

Run-Flat Tire PAX
  WARNING Run-flat tires must be replaced after they have gone flat. Pay close attention to the installation instructions. Refer to → Chapter „Tir ...

© 2016-2025 Copyright www.vwpolo.net