Volkswagen Polo Service & Repair Manual: EU Tire Label, Goals

Volkswagen Polo Service & Repair Manual / Whels, Tires, Whel Alignment / Tire Information / EU Tire Label / EU Tire Label, Goals

To reduce fuel usage

To improve road safety

To reduce traffic noise

The EU Tire Label Provides the End-User with Information About the Tire's Most Important Properties. However, it Does Not Provide All Critical Safety Criteria.

Explaining additional tire properties can exert a sustained influence on the purchasing decision.

The customer should be made aware of the limited reliability of the label regarding tire properties. For example, the label says nothing about the winter properties on winter tires.

Tire tests remain important sources of information for dealers and end-users.

The tires test check many other performance factors, including the following:

Aquaplaning properties

Driving stability

Steering precision

Service life

Braking properties

Performance under winter conditions

EU Tire Label, Short Overview

Starting on 11/1/2012, tire manufacturers must comply with the new EU Regulation (EG) 1222/2009 (Tire Labeling Regulation). The Tire Labeling Regulation requires that informati ...

EU Tire Label, Categories

Rolling Resistance. Refer to → Anchor Wet Grip. Refer to → Anchor Noise Emission. Refer to & ...

Other materials:

Notes on tow-starting
First read and observe the introductory information and safety warnings Vehicles should not be tow-started wherever possible. Use jump leads to start the engine instead . For technical reasons, the following vehicles cannot be tow-started: Vehicles with an automatic gearbox. If ...

Fuses in the vehicle
Fig. 172 Dash panel on the driver side: fuse box cover Fig. 173 In the front left of the engine compartment: fuse box cover First read and observe the introductory information and safety warnings Fuses must always be replaced by a new fuse with the same amp rating (same colour and marki ...

Secondary Lock
The secondary lock is a housing securing mechanism (second locking mechanism) that secures all wires in one contact housing. If a secondary lock is installed at a contact housing, it must always be opened or removed using specified tool before releasing ...