VW Polo manuals

Volkswagen Polo Owners Manual: Driving with an automatic gearbox

First read and observe the introductory information and safety warnings

The gearbox changes the forward gears up and down automatically.

Driving down hills

The steeper the gradient, the lower the gear you will need. Lower gears increase the braking effect of the engine. Never allow the vehicle to roll down mountains or hills in the neutral position N.

Stopping the vehicle and pulling away when driving uphill

The steeper the incline, the lower the gear that is required.

If you wish to stop the vehicle or pull away when driving uphill you should use the Hill Hold Assist function   .

Vehicles without Hill Hold Assist: When you stop the vehicle on an incline and a position is still selected, the vehicle must always be prevented from rolling by depressing the brake pedal or by applying the handbrake. The brake pedal or the handbrake should not be released until you start to pull away  .

Kickdown

The kickdown mechanism enables maximum acceleration in the selector lever positions D and S, or in the Tiptronic position.

If the accelerator pedal is depressed fully, the gearbox will automatically shift to a lower gear, depending on the speed and engine revs. This will make use of the full vehicle acceleration  .

The gearbox does not shift up to the next gear until the engine reaches the maximum engine speed for the gear.

WARNING

Rapid acceleration can cause loss of traction and skidding, particularly on slippery roads. This can cause you to lose control of the vehicle, which can lead to accidents and serious injuries.

NOTICE

Changing gear using Tiptronic
Fig. 113 Selector lever in Tiptronic position (left-hand drive) The controls are mirrored for right-hand drive vehicles Fig. 114 Steering wheel with paddles for Tiptronic First read and observ ...

Fault in the function of the automatic gearbox
First read and observe the introductory information and safety warnings Emergency programme There is a fault in the system if all the displays on the instrument cluster for the selector lever p ...

Other materials:

Customer Service Paint Paint Structure
Galvanized Sheet Metal on Both Sides Previous attempts to match flanges have led to the use of only galvanized sheet metal on both sides. Only here do the cathodic protection and the zinc coating barrier effect work optimally together. T ...

General Information
Tongue Weight Specifications The tongue weight specifications on the trailer hitch type label are inspection values and only valid for the hitch. The permitted tongue weight for the vehicle may be less and it must not b ...

Two-Part Thinner
Definition: Two-Part Thinner -LVE 009 001 A5- Two-Part Thinner, Long -LVM 009 300 A2- Two-Part Thinner, Plus -LHA 014 000 A5- Two-Part Thinner, Special -LVM 009 2 ...

© 2016-2024 Copyright www.vwpolo.net