First read and observe the introductory information and safety warnings
Towing requires some experience, especially when using a tow rope. Both drivers should be familiar with the technique required for towing. Inexperienced drivers should not attempt to tow.
When driving, ensure that you do not pull too hard on the towing vehicle and take care to avoid jerking movements. When towing on an unpaved road, there is always a risk of overloading and damaging the anchorage points.
You can still use the turn signals if your vehicle is towed with the hazard warning lights and ignition switched on. Move the turn signal lever to signal the required direction. The hazard warning lights will not flash while the turn signal is being used. The hazard warning lights will start flashing automatically as soon as the turn signal lever is moved back to the neutral position.
Notes for the driver of the towed vehicle:
Notes for the driver of the towing vehicle
Introduction
This chapter contains information on the following subjects:
→ Socket in the vehicle
Electrical equipment can be connected to the socket in the vehicle.
The devices connected must be in good condition and fault-free.
Additional information and warnings:
Cigarette lighter
Acce ...
Service fluids and consumables
First read and observe the introductory information
and safety warningsAll service fluids and consumables, e.g.
toothed belts, tyres, coolant, engine oil, spark plugs and vehicle batteries, are
being constantly developed. For this reason, service fluids and consumables should
be replaced at ...
Bonding Agent
Definition:
Bonding Agent -LLS MAX 015-, plastic
Edition 10/2012
Product Description
The Bonding Agent -LLS MAX 015- is a universal
single-component bonding agent for all sta ...