IntroductionFlat Spots, Correcting
Flat spots cannot be removed from tires with workshop
equipment.
Such flat spots can be "driven out" only by driving the car
until the tires are warm.
We do not recommend the following method during ...
Taper
Taper is caused by slightly offsetting the tread and/or the
belt by a few tenths of a millimeter from the geometric center
of the tire. Taper cannot be recognized visually nor can it be
measured with workshop equipment.
...
Service interval display
First read and observe the introductory
information and safety warnings
The service display is shown on the instrument cluster or .
Service schedules at Volkswagen are divided into two categories, oil change
service and inspections. The service interval display provides information on
the n ...