Volkswagen Polo Service & Repair Manual: Cruise Control System, Activating and Deactivating

Volkswagen Polo Service & Repair Manual / Battery, Starter, Generator, Cruise Control / Cruise Control System / Cruise Control System, Activating and Deactivating

General Description

Cruise control system functions are controlled by the engine control module.

–	Cruise control system can be activated/deactivated. Refer to → Chapter „Cruise Control System, Activating and Deactivating“.

DTC Recognition and Display

Malfunctions in relation to the cruise control system are sent via the engine control module.

Use the Vehicle Diagnostic Tester in the “Guided Fault Finding” mode for fault finding.

–	Connect the Vehicle Diagnostic Tester. Refer to → Chapter „Vehicle Diagnosis, Testing and Information Systems“.

–	On the Vehicle Diagnostic Tester, select “Guided Fault Finding”.

–	Using the “GO TO” button, select “Functions/Component selection” and the following menu options in sequence:

Powertrain

Engine code

01 - On Board Diagnostic (OBD) capable systems

Engine management system or Diesel Direct Injection & Glow Plug System

Functions

Cruise Control System, Activating and Deactivating

Special Tools

Special tools and workshop equipment required Battery Charger -VAS5903- ...

Other materials:

HS Spot Thinner
Definition: HS Spot Thinner -LVM 006 000 A2- Edition 06/2013 Product Description HS Spot Thinner -LVM 006 000 A2- is a special drying accelerator for minor repairs in certain ...

Notes on tow-starting
First read and observe the introductory information and safety warnings Vehicles should not be tow-started wherever possible. Use jump leads to start the engine instead . For technical reasons, the following vehicles cannot be tow-started: Vehicles with an automatic gearbox. If ...

Battery Test, Performing using Battery Tester -VAS6161
Special tools and workshop equipment required Battery Tester -VAS6161- WARNING Risk of injury. Follow all Warnings and Safety Precautions. Refer to →& ...