Volkswagen Polo Owners Manual: Coolant
- Introduction
- Warning lamp and coolant temperature display
- Coolant specification
- Checking the coolant level and refilling coolant
Changing engine oil
First read and observe the introductory information
and safety warningsThe engine oil must be changed regularly in accordance
with the data given in the service schedule.
The engine oil and filt ...
Introduction
This chapter contains information on the following subjects:
→ Warning lamp and coolant temperature display
→ Coolant specification
→ Checking the coolant level and refil ...
Other materials:
Corrective Action When Vehicle Pulls to One Side
Test Conditions Before and During the Road Test
–
Check all suspension components on front and rear axle for
damage.
–
Check tire pressure and correct if necessary.
– ...
Test after driving for 10 minutes
First read and observe the introductory
information and safety warnings
Reconnect the tyre filler hose and check the tyre pressure on the tyre
pressure display ⑥.
1.3 bar (19 psi / 130 kPA) and lower:
Do not drive on! The tyre cannot be sealed adequately
with the breakdown set.
...
Infrared Dryer -VAS6876
Definition:
Infrared Dryer -VAS6876-
Product Description:
The infrared dryer is used to dry paste, filler, base paint,
top coats and clear coats on vertical and horizontal surfaces.
...
