Volkswagen Polo Service & Repair Manual: Compressor Types, Checking Pressures
Note
| Check cooling performance. The A/C system is functioning
correctly when the air flowing from the instrument panel vents
has a temperature of 70C or lower. |
| Setting on Climatronic “LO”. |
| Setting on A/C system “AC” on; “max”; “cold”. |
| Connections with valve and service connections for measuring
and checking. |
| Check on vehicles with restrictor and reservoir (with
internally regulated A/C compressor). Refer to
→ Chapter „Checking with Restrictor and Reservoir, with
Internally Regulated A/C Compressor“. |
| Check on vehicles with expansion valve and receiver/dryer
(with internally regulated A/C compressor). Refer to
→ Chapter „Checking with Expansion Valve and Receiver/Dryer,
with Internally Regulated A/C Compressor“. |
| On vehicles with expansion valve and receiver/dryer (without
regulated A/C compressor). Refer to
→ Chapter „Checking with Expansion Valve and Receiver/Dryer,
without Regulated A/C Compressor“. |
| Checking pressures for vehicles with restrictor, reservoir
and A/C Compressor Regulator Valve -N280- (externally regulated
A/C compressor). Refer to
→ Chapter „Checking with Restrictor, Reservoir and A/C
Compressor Regulator Valve -N280-, Externally Regulated A/C
Compressor“. |
|
|
|
Note
Check cooling performance. The A/C system is functioning
correctly when the air flowing from the instrument panel vents
has a temperature of ...
Note
Connecting service station. Refer to
→ Chapter „Connecting Service Station“.
Observe test requirements ...
Other materials:
Indicator lamps
First read and observe the introductory information
and safety warnings
Lit up
Possible cause
Solution
The start/stop system is not available. Automatic engine
switch-off is active.
Take your foot off the brake to start the ...
Stand -VAS6873/1
Definition:
Stand -VAS6873/1-
Product Description:
Stand -VAS6873/1- with clock timer
Technical Data:
220-240 V, 1 OH+PE
Deliver ...
Opening and closing the bonnet
Fig. 134 A: release lever in the footwell
on the driver side. B: release lever on the bonnet
Fig. 135 C: holder for the bonnet stay
in the lock carrier. D: bonnet secured with the bonnet stay
First read and observe the introductory information
and safety warningsOpening the bonnet
Ensu ...
© 2016-2026 Copyright www.vwpolo.net
