Volkswagen Polo Service & Repair Manual: Cigarette Lighter Socket, Removing and Installing

Volkswagen Polo Service & Repair Manual / Interior Lights, Switches / Cigarette Lighter -U1- / Cigarette Lighter Socket, Removing and Installing

Special tools and workshop equipment required

Cigarette Lighter Release Tool -T40148-

Note

The removal and installation for all sockets is performed in the same way and is only described for the cigarette lighter socket.

Caution

Using force to remove cigarette lighter sockets without illumination can result in damage to the mounting sleeve retainers.

The Cigarette Lighter Release Tool -T40148- can only be used to remove cigarette lighter sockets with illumination.

The puller is not capable of releasing the retainers on power sockets without illumination.

Sockets without illumination usually cannot be removed without damage.

Removing

–	Remove the cigarette lighter, blank plug, etc. from the socket, if necessary.

Note

The illustration shows the socket removed.

Caution

The socket or mounting sleeve can be damaged.

Make sure the puller is seated properly or the mounting sleeve retainers will not release.

–	Insert puller -arrow- in receptacle so retainers -1- engage in recesses -2-.

Cigarette Lighter Socket, Removing and Installing

–	Release the mounting sleeve retainers by pulling on grip piece -3- in direction of -arrow-.

–	Pull receptacle with puller out of mounting sleeve.

Caution

The wiring for the socket could get damaged.

Pay attention to the lengths of the electrical wires when removing the outlet.

Cigarette Lighter Socket, Removing and Installing

Depending on installation location, it is recommended to use the Thrust Piece -T40148/1--2- with knurled nut -1-.

Caution

Make sure none of the surrounding components are damaged when using the thrust piece.

–	Disconnect electrical connection.

Note

There are different versions of the sockets and cigarette lighter sockets due to different installation locations and construction. The differences are primarily In the length and type of electrical connectors. On sockets or cigarette lighter sockets with an electrical cable pig tail, additional work may be necessary to access the connector.

Cigarette Lighter Socket, Removing and Installing

–	Release the puller retaining tabs by pressing the spindle -1- in the direction of the -arrow B-. Then release the press -2- by turning it slightly to left -arrow A-. Remove the puller from the outlet.

Note

Make sure the puller retainers are not spread.

Caution

The cigarette lighter can be ejected from the socket when the heating cycle is complete.

Inserting the puller into the socket spreads the socket retainer springs and reduces their ability to retain the cigarette lighter insert.

After removing the socket, bend the retainer springs together carefully to tighten them and make sure the insert remains in the socket when the heating cycle is complete.

Cigarette Lighter Socket, Removing and Installing

–	Carefully bend retainer springs together -arrows-.

–	Make sure the cigarette lighter insert is not ejected completely into vehicle interior on completion of glow cycle, and remains in receptacle.

Installing

Install in reverse order of removal.

Cigarette Lighter Socket, Removing and Installing

Overview - Cigarette Lighter -U1-

Caution Using force to remove cigarette lighter sockets without illumination can result in damage to the mounting ...

Cigarette Lighter Illumination Bulb -L28-, Removing and Installing

Note On some vehicle equipment levels, socket illumination is via Light Emitting Diode (LED) instead of a bulb. These LEDs are integrated with th ...

Other materials:

Two-Part HS Brilliant Plus Clear Coat
Definition: Two-Part HS Brilliant Plus Clear Coat -LZK 769 K05 A5- Edition 02/2012 Product Description Two-part HS brilliant clear coat is a high-gloss, VOC compliant high so ...

Cleaning leatherette upholstery
First read and observe the introductory information and safety warningsPlease observe the following notes prior to cleaning the leatherette upholstery . Only use water and neutral detergents to clean the leatherette upholstery. NOTICE Do not use solvents, wax polish, shoe cream, spot remover ...

Service Charging with Battery Charger -VAS5900
Special tools and workshop equipment required Battery Charger -VAS5900- WARNING Risk of injury. Follow all Warnings and Safety Precautions. Refer to → ...