To ensure your own safety and that of your passengers, observe the following actions in the specified order :
Find a firm and level surface suitable for lifting the vehicle.
Stop the engine, select a gear on a manual gearbox or in case of automatic gearbox, move the selector lever to position P Changing gear Changing gear Automatic gearbox see Automatic gearbox_0 Automatic gearbox see Changing gear_0 Automatic gearbox Manual gearbox see Changing gear_0 Manual gearbox . Apply the handbrake Braking, stopping and parking Brakes Parking .
Chock the wheel diagonally opposite using the collapsible chocks or other suitable objects.
When towing a trailer, unhitch the trailer from the vehicle and park it properly.
Loosen the wheel bolts on the wheel that is being changed Wheel bolts Anti-theft wheel bolts Wheel bolts Changing a wheel Wheel bolts_2 .
Find the jacking point under the vehicle which is closest to the wheel that is being changed.
Raise the vehicle jack until it just fits under the jacking point of the vehicle.
Ensure that the entire surface of the foot of the vehicle jack is resting securely on the ground and that the foot of the vehicle jack is positioned precisely, i.e. vertically beneath the point of application .
Position the vehicle jack. At the same time, continue to crank the claw up until it is in position around the vertical rib underneath the vehicle .
Crank the vehicle jack further until the wheel is just clear of the ground.
WARNING
Incorrect use of the vehicle jack can cause the vehicle to slip off the jack, which can lead to severe injuries. Please note the following to help reduce the risk of injuries:WARNING
Ignoring any of the items on this important safety checklist can lead to accidents and severe injuries.One-Part Clear Coat
Definition:
One-Part Clear Coat -LLS MAX 010-
Edition 10/2008
Product Description
The One-Part Clear Coat -LLS MAX 010- is a single-compound
product. The raw material base is ...
Corrosion Protection for Body, Attached and Welded Parts
Attachments
Coat the insides of the fenders, doors, covers and lids
completely. A spray application wet in wet procedure is
sufficient.
Before assembly, the seal the inside of the attachments with
cavit ...
Vehicle Registration Documents Since 01/10/2005
The implementation of EU guideline 1999/37/EG "Vehicle
registration documents" in national legislation and legal data
protection requirements have made the introduction of new, fraud
resistant registration documents necessary.
...