First read and observe the introductory information
and safety warnings
General notes
There are different types of air recirculation, depending on the level of equipment: | |
---|---|
![]() |
Air recirculation mode (heating and fresh air system, air conditioning system (manual)). |
![]() |
Air recirculation mode (Climatronic). |
The air recirculation mode prevents outside air from entering the vehicle.
If the outside temperature is very high, the air recirculation mode should be selected for a short time in order to cool the vehicle interior more quickly.
For safety reasons, the air recirculation mode will switch off if the
button is pressed or
if the air distribution regulator is switched to
.
Switching air recirculation mode for the air conditioning system (manual) or
the heating and fresh air system
on and off
Switching on: press the
button repeatedly until the
indicator lamp in the button lights up.
Switching off: press the
button repeatedly until the
indicator lamp in the button is no longer lit up.
Switching air recirculation mode on and off for Climatronic
Switching on: press the
button repeatedly until the
symbol in the display field lights up.
Switching off: press the
button repeatedly until the
symbol in the display field is no longer lit up.
WARNING
NOTICE
Test Requirements
Note
The A/C system is functioning correctly when the air flowing
from the instrument panel vents has a temperature of 70C
or lower.
Setting on Climatronic “LO”.
Setting on A/C system ...
Flat Spots
What is a Flat Spot From Standing?
Terms like flat portion, flattening, are also used as a term
for flat spots from standing.
Flat spots from standing cause vibration, like an
incorrectly balanced wheel. It is important ...
Wheel, Balancing on Stationary Balancing Machine
Before beginning balancing, the following requirements must
be fulfilled.
The tire pressure must be OK.
The tire profile must not be worn on one side. The tire
profile must be at least 4 mm.
...