Volkswagen Polo Owners Manual: After changing a wheel
First read and observe the introductory
information and safety warnings
- Clean the tools as necessary and place them back in the toolbox in the luggage compartment .
- Stow the spare wheel, temporary spare wheel or the removed wheel safely in the luggage compartment.
- The tightening torque of the wheel bolts should be checked immediately with a torque wrench .
- The damaged wheel should be replaced as soon as possible.
In vehicles with a Tyre Pressure Loss Indicator, the system may have to re-learn if new tyres are fitted .
Changing a wheel
Fig. 170 Changing the wheel:
removing the wheel bolts with the screwdriver handle
First read and observe the introductory
information and safety warnings
Removing the wheel
Read the checkli ...
Breakdown set
...
Other materials:
Securing mounts, roof bars or load carrying system
Fig. 90 Securing points for mounts or
roof bars (both sides) A: for 2-door vehicles without roof railing. B: for 4-door
vehicles without roof railing. C: for vehicles with roof railing
First read and observe the introductory information
and safety warnings
Mounts or roof bars serve as the b ...
Introduction
This chapter contains information on the following subjects:
→ Indicator lamp
→ Using the cruise control system
The cruise control system (CCS) helps to maintain an individual set speed at
forward speeds of approx. 20 km/h (12 mph) and higher.
The CCS only slows the veh ...
CAN Bus Wires, Repairing
Unshielded two-strand wiring -1-
and -2- with a cross section of
0.35 mm2 or 0.5 mm2
can be used as CAN bus wiring.
The color coding of CAN bus wires can be found in the
following table:
...
