Volkswagen Polo Service & Repair Manual: A/C Service Station, Working with
- Important Information when Working with the A/C Service Station
- A/C Service Station, Connecting for Measuring and Testing
- Discharge Refrigerant Circuit with A/C Service Station
- Refrigerant Circuit with A/C Service Station, Draining
- Refrigerant Circuit with A/C Service Station, Filling
- A/C System, Operating after Charging
- Refrigerant in A/C Service station Container, Filling
- A/C Service Station, Emptying
Refrigerant Circuit
A/C System Repair Information
An A/C system made for refrigerant R12 must not be filled
with refrigerant R134a without making modifications to the
refrigerant circui ...
Important Information when Working with the A/C Service Station
Caution
If it is suspected that chemicals were added to the
refrigerant circuit to seal leaks, do not connect the ...
Other materials:
CAN Bus Wires, Repairing
Unshielded two-strand wiring -1-
and -2- with a cross section of
0.35 mm2 or 0.5 mm2
can be used as CAN bus wiring.
The color coding of CAN bus wires can be found in the
following table:
...
Introduction
This chapter contains information on the following subjects:
→ Ignition lock
→ Starting the engine
→ Stopping the engine
→ Electronic immobilizer
Notes in this chapter concerning the automatic gearbox are applicable
both for the automatic gearbo ...
Introduction
With the ignition switched on, the different display functions can be
accessed via the menus.
There are no buttons on the windscreen wiper lever in vehicles equipped with
a multifunction steering wheel. The multifunction display is controlled using
the buttons on the multifunction steering w ...
