Volkswagen Polo Service & Repair Manual: A/C Pressure Switch -F129
 Note
| For switching pressures, removing and installing switches
and switch arrangement and version, see vehicle-specific
refrigerant circuit. |
|
|
|
| This pressure switch has 3 functions: |
| 1. Switches the coolant fan to the next higher level when
the pressure in the refrigerant circuit increases (approximately
16 bar (232 psi)). |
| 2. Switches off A/C system if pressure is excessive
(approximately 32 bar (464 psi)), for example. because of
insufficient engine cooling. |
| 3. Switches off A/C system if pressure is insufficient
(approximately 2 bar (29 psi)), for example. loss of
refrigerant. |
Note
| A/C Pressure Switch -F129- replaces the A/C Refrigerant High
Pressure Switch -F23-, A/C Refrigerant Low Pressure Switch -F73-
and the Magnetic Clutch High Pressure Switch -F118-. |
|
|
|
Note
For switching pressures, removing and installing switches
and switch arrangement and version, see vehicle-specific
refrigerant circuit.
...
Note
For switching pressures, removing and installing switches
and switch arrangement and version, see vehicle-specific
refrigerant circuit.
...
Other materials:
Charge Factor
A vessel must have space for vapor as well as liquid. As the
temperature rises, the liquid expands. The space filled with
vapor decreases. At a certain point, there will only be liquid
in the vessel. Beyond this, even a slight increase in
temperature cau ...
Windshield and Rear Window Washer System
The following hose connection types are used for connecting
hoses to pumps and spray nozzles or as separating points
–
To loosen the connection, pulling both halves of the
coupling apart.
...
A/C System, Operating after Charging
Caution
If it is suspected that chemicals were added to the
refrigerant circuit to seal leaks, do not connect the
A/C service station and do not extract the refrigerant.
...
© 2016-2025 Copyright www.vwpolo.net
Refrigerant Circuit Connections with Valve for Switches
High Pressure Sensor -G65