Note
|
|
Coolant Fan Control Module -J293
Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor
-G308Wear Spots
Wear spots are caused by a hard stop with locked wheels
whereby the rubber compound is abraded from the contact patch.
When the tires slide across the road surface, frictional
heat is generated which reduces the abrasion resistance on the
...
Service position for the front windscreen wipers
Fig. 74 Wiper blades in service position
First read and observe the introductory information
and safety warnings
The windscreen wiper arms can be lifted off the windscreen when in the service
position . Carry out the following steps to move the windscreen wipers to the service
position:
...
Coolant specification
First read and observe the introductory information
and safety warningsThe cooling system is filled at the factory with a mixture
of specially prepared water and at least 40% coolant additive G 13
(TL-VW 774 J). The coolant additive is dyed purple. This mixture of water and coolant
additive ...