Volkswagen Polo Service & Repair Manual: Silicone Remover, Long -LLS MAX 008

Volkswagen Polo Service & Repair Manual / General Paint Information / Original Products / SprayMax System / Silicone Remover, Long -LLS MAX 008

Definition:

Silicone Remover, Long -LLS MAX 008-

Edition 10/2008

Product Description

The Silicone Remover, Long -LLS MAX 008- is a cleaning agent that is rich in active ingredients, is easy to apply and evaporates leaving no residue. The raw material base has specific solvent combinations.

Properties:

Application-oriented product-specific aerosol formulation

Constant atomizing pressure

Aerosol distribution

Highest yield

Professional painting result

Easy to process

Evaporates leaving no residue

Removes silicone, grease, oil, wax, dirt, tar and soot

Contains a mild, nonaggressive cleaning solution

Application Instructions

Application

Recommended for:

Parts painting and spot repair aid

Suitable base surfaces:

Primed, filled metal, plastic, glass, old- and factory paint surfaces, painted and unpainted base surfaces

Base Surface	Suitability
Primed, filled surfaces	+++
Factory and old paint	+++
Plastic parts	+++
Metal/glass	+++

Properties:

Painted surfaces do not become corroded

Removes all types of silicone, an ideal dirt and soot cleaner

Removes cavity sealant or wax

Removes gummy, dried-on grease residue, for example door hinges

Removes oil and grease residue

Ideal solvent for tar marks

Removes adhesive residue, for example stickers

Processing

Note

For work safety, wear appropriate, personal protective equipment:

Breathing mask type: A2/P2

Latex or nitrile protective gloves, for example

Application type “coat”

–	Apply a light coat and wipe with a clean, dry fleece cloth.

–	Allow to evaporate from the cleaned surfaces fully.

–	Repeat the cleaning procedure if the surface is very dirty.

–	Replace the cloths a few times. Do not use any dirty cloths.

Note

If the spray application is interrupted, make sure that the valve above the spray head is empty.

Caution

For work safety, wear appropriate, personal protective equipment.

Note the safety data sheets as well as the warnings on the label of the spray nozzle.

Dispose of the empty spray cans as recyclable material.

Characteristics

Silicone Remover, Long -LLS MAX 008

Solid content:	0 %
Yield:	Approximately 0.75 to 1.0 m² / spray can
Gloss level:	not applicable
VOC value:	620 g/L, 248 g/can

Storage

The guaranteed shelf life of 36 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +20 °C (68 °F).

Silicone Remover, Long -LLS MAX 008

Silicone Remover -LLS MAX 007

Definition: Silicone Remover -LLS MAX 007- Edition 10/2008 Product Description T ...

Blender

Definition: Blender -LLS MAX 009- Edition 10/2008 Product Description The Blende ...

Other materials:

Introduction
This chapter contains information on the following subjects: → Ashtray in the drink holder → Cigarette lighter Additional information and warnings: Electrical socket Accessories, modifications, repairs and renewal of parts WARNING Improper use of the ashtray and ...

Displays
Fig. 12 A: bonnet open, B: tailgate open, C: front left door open, D: right rear door open (only in four-door vehicles) First read and observe the introductory information and safety warnings Depending on the vehicle equipment level, a variety of information can be displayed in the instr ...

Tyre damage
First read and observe the introductory information and safety warningsDamage to tyres and rims is often not readily visible. Any unusual vibrations or signs that the car is pulling to one side may indicate that one of the tyres is damaged . Reduce your speed immediately if you suspect th ...