Explanation of Test Results
General InformationTire Pressure Monitoring Sensor without Valve, Removing and Installing,
Vehicle Before Customer Delivery
Special tools and workshop equipment
required
Torque Wrench -VAG1410-
Perform the Following:
Removing
–
Remove the tire from the disc wheel.
&nb ...
Test after driving for 10 minutes
First read and observe the introductory
information and safety warnings
Reconnect the tyre filler hose and check the tyre pressure on the tyre
pressure display ⑥.
1.3 bar (19 psi / 130 kPA) and lower:
Do not drive on! The tyre cannot be sealed adequately
with the breakdown set.
...
Single Wire Seals, Installing
Note
Single wire seals prevent the penetration of water and dirt
into the contact housing. They are installed, for example, in
the engine compartment and must be reinstalled after a repair.
Single wire seal is crimpe ...