Volkswagen Polo Owners Manual: Positive and earth jump lead connection points
Fig. 190 In the engine compartment: jump lead connection point, positive ⊕
First read and observe the introductory
information and safety warnings
The positive jump lead connection point is in the engine compartment. In order to establish a suitable earth connection, screw towing eye into the front mounting provided for this purpose .
The vehicle can only be jump-started or be used to jump-start another vehicle via these jump lead connection points.
Introduction
This chapter contains information on the following subjects:
→ Positive and earth jump lead connection points
→ How to start the engine using jump leads
If the engine fails to sta ...
How to start the engine using jump leads
Fig. 191 How to connect the jump
leads when starting vehicles without start/stop system: discharged battery Ⓐ and
battery providing assistance Ⓑ
Fig. 192 How to connect the jump
leads when ...
Other materials:
Evaporator Vent Temperature Sensor -G263- or Evaporator Temperature Sensor
-G308
Function:
The Evaporator Vent Temperature Sensor -G263- or Evaporator
Temperature Sensor -G308- determines the temperature behind the
evaporator. This value goes to the air conditioning control
module and serves as a reference signal for ...
Seat heating
Fig. 43 In the centre console: buttons
for the front seat heating
First read and observe the introductory information
and safety warnings
The seat cushions on the front seats can be heated electrically when the ignition
is switched on. In some versions, the backrests may also be heated.
D ...
Introduction
This chapter contains information on the following subjects:
→ Opening or closing the windows electrically
→ Electric windows – functions
→ Roll-back function for the electric windows
Additional information and warnings:
Central locking system
Cleaning and ...