Volkswagen Polo Owners Manual: Introduction
This chapter contains information on the following subjects:
→ Stowage
→ Contents
Observe any country-specific legislation when securing your vehicle in the event of a breakdown.
Additional information and warnings:
- Preparation for working in the engine compartment
- In an emergency
- Changing a wheel
- Breakdown set
WARNING
- Always ensure that the vehicle toolkit, breakdown set and spare wheel or temporary spare wheel are secured in the luggage compartment.
WARNING
- Never work with unsuitable or damaged tools from the vehicle toolkit.
Vehicle toolkit
...
Stowage
Fig. 161 In the luggage
compartment underneath the floor covering A: Spare wheel and vehicle toolkit
without ball coupling, B: Spare wheel and vehicle toolkit with ball coupling, C:
Spare wheel ...
Other materials:
Reinforced Shock Absorbers and Coil Springs
Reinforced shock absorbers and coil springs on the vehicle
rear axle reduce pitching motions between the vehicle and the
trailer. If not already installed in the factory, these shock
absorbers and springs can often be retrofitted at authorized
Volk ...
CAN Bus Wires, Repairing
Unshielded two-strand wiring -1-
and -2- with a cross section of
0.35 mm2 or 0.5 mm2
can be used as CAN bus wiring.
The color coding of CAN bus wires can be found in the
following table:
...
Welding and Soldering on Refrigeration Systems
Before performing welding or soldering work on vehicles near
the air conditioning system components, extract the refrigerant
and remove the residue by flushing with compressed air and
nitrogen.
The products of refrigerant decomposition d ...