VW Polo manuals

Volkswagen Polo Service & Repair Manual: AGM Battery, Checking

Perform Battery Checks in the Following Sequence:
1.  Visual inspection. Refer to → Chapter „Visual Inspection“.
2.  Check the battery using the Battery Tester -VAS6161-. Refer to → Chapter „Battery Tester -VAS6161-“.
3.  Depending on the battery test result, “perform a current draw test”. Refer to → Chapter „Current Draw Test “.
Battery with Visual Indicator, Checking
  WARNING Risk of injury. Follow all Warnings and Safety Precautions. Refer to → Chapter „Warnings and ...

Visual Inspection
  WARNING Risk of injury. Follow all Warnings and Safety Precautions. Refer to → Chapter „Warnings and ...

Other materials:

Wiring Harness Repair Set - Wire Strippers -VAS1978/3
The Wiring Harness Repair Set - Wire Strippers -VAS1978/3- is used for professional stripping and cutting of wires. The Wiring Harness Repair Set - Wire Strippers -VAS1978/3- is a component of the Wiring Harness Repair Set -VAS1978B- and ...

Single Wire Seals, Installing
  Note Single wire seals prevent the penetration of water and dirt into the contact housing. They are installed, for example, in the engine compartment and must be reinstalled after a repair. Single wire seal is crimpe ...

Tire Pressure Sensor and Metal Valve, Removing and Installing
Special tools and workshop equipment required Torque Wrench 1410 -VAG1410- and Torque Wrench 1331 5-50Nm -VAG1331- –  Place metal valve with rubber seal through rim from inside. ...

© 2016-2026 Copyright www.vwpolo.net